Archive for June, 2011
Drop Forged Wire Rope Clamps Blue U Bolt Korea
   |
| Drop Forged Wire Rope Clamps |
| DROP FORGED WIRE ROPE CLAMPS – Forged steel, hot galvanized | ||||||||||
| SIZE IN INCHES |
MIN. CLAMPS REQD. | TORQUE IN LBS. FT.* | APPROX. WEIGHT IN POUNDS | DIMENSIONS | ||||||
| A | B | C | D | E | F | G | ||||
| 1/8 | 2 | 4.5 | .05 | .19 | .75 | .44 | .44 | .38 | .81 | .94 |
| 3/16 | 2 | 7.5 | .10 | .25 | .94 | .56 | .56 | .50 | .94 | 1.19 |
| 1/4 | 2 | 15 | .18 | .31 | 1.06 | .56 | .75 | .63 | 1.19 | 1.50 |
| 5/16 | 2 | 30 | .31 | .38 | 1.44 | .75 | .88 | .75 | 1.31 | 1.69 |
| 3/8 | 2 | 45 | .46 | .44 | 1.50 | .75 | 1.00 | .88 | 1.56 | 1.94 |
| 7/16 | 3 | 65 | .73 | .50 | 1.88 | 1.00 | 1.19 | 1.00 | 1.81 | 2.31 |
| 1/2 | 3 | 65 | .73 | .50 | 1.88 | 1.00 | 1.19 | 1.06 | 1.81 | 2.31 |
| 9/16 | 3 | 95 | 1.00 | .56 | 2.38 | 1.25 | 1.31 | 1.13 | 2.06 | 2.50 |
| 5/8 | 3 | 95 | 1.00 | .56 | 2.38 | 1.25 | 1.31 | 1.25 | 2.06 | 2.50 |
| 3/4 | 4 | 130 | 1.50 | .63 | 2.75 | 1.38 | 1.50 | 1.38 | 2.31 | 2.75 |
| 7/8 | 4 | 225 | 2.7 | .75 | 3.19 | 1.44 | 1.81 | 1.69 | 2.63 | 3.31 |
| 1 | 5 | 225 | 2.7 | .75 | 3.63 | 1.75 | 1.88 | 1.75 | 2.63 | 3.47 |
| 1 1/8 | 6 | 225 | 3.1 | .75 | 4.00 | 2.00 | 2.00 | 1.88 | 2.81 | 3.56 |
| 1 1/4 | 7 | 360 | 4.6 | .88 | 4.38 | 2.25 | 2.31 | 2.06 | 3.25 | 4.06 |
| 1 3/8 | 7 | 360 | 5.2 | .88 | 4.63 | 2.31 | 2.38 | 2.25 | 3.44 | 4.25 |
| 1 1/2 | 8 | 360 | 5.9 | .88 | 4.94 | 2.38 | 2.63 | 2.50 | 3.50 | 4.38 |
| 1 3/4 | 8 | 590 | 9.8 | 1.13 | 5.88 | 2.75 | 3.06 | 2.88 | 3.75 | 5.25 |
| 2 | 8 | 750 | 13.75 | 1.25 | 6.50 | 3.00 | 3.31 | 3.38 | 4.44 | 5.81 |
| 2 1/4 | 8 | 750 | 15.7 | 1.25 | 7.13 | 3.31 | 3.88 | 3.81 | 4.50 | 6.31 |
| 2 1/2 | 9 | 750 | 17.9 | 1.25 | 7.75 | 3.38 | 4.13 | 4.25 | 4.50 | 6.44 |
Blue U-Bolts (Korea)
When using U-bolt clamps, extreme care must be exercised to make certain that they are attached correctly. The correct way to attach U-bolts is shown above; the "U" section is in contact with the ropes\’s "dead end" and is clear of the thimble. The "live end", carrying the load, is gripped by the saddle of the clamp. Also, the tightening and retightening of the nuts must be accomplished as required.
* Based on clean, unlubricated threads.
Hot galvanized, according to Federal Specification FF-C-450D, Type 1, Class 1. Does not include 1/8" and 3/16".
Table above shows minimum torque required to reach maximum holding power.
Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope.
WARNING: Read important warnings and safety information.
Drop Forged Wire Rope Clamps Blue U-bolt – Korea
|
| Drop Forged Wire Rope Clamps |
| DROP FORGED WIRE ROPE CLAMPS – Forged steel, hot galvanized | ||||||||||
| SIZE IN INCHES |
MIN. CLAMPS REQD. | TORQUE IN LBS. FT.* | APPROX. WEIGHT IN POUNDS | DIMENSIONS | ||||||
| A | B | C | D | E | F | G | ||||
| 1/8 | 2 | 4.5 | .05 | .19 | .75 | .44 | .44 | .38 | .81 | .94 |
| 3/16 | 2 | 7.5 | .10 | .25 | .94 | .56 | .56 | .50 | .94 | 1.19 |
| 1/4 | 2 | 15 | .18 | .31 | 1.06 | .56 | .75 | .63 | 1.19 | 1.50 |
| 5/16 | 2 | 30 | .31 | .38 | 1.44 | .75 | .88 | .75 | 1.31 | 1.69 |
| 3/8 | 2 | 45 | .46 | .44 | 1.50 | .75 | 1.00 | .88 | 1.56 | 1.94 |
| 7/16 | 3 | 65 | .73 | .50 | 1.88 | 1.00 | 1.19 | 1.00 | 1.81 | 2.31 |
| 1/2 | 3 | 65 | .73 | .50 | 1.88 | 1.00 | 1.19 | 1.06 | 1.81 | 2.31 |
| 9/16 | 3 | 95 | 1.00 | .56 | 2.38 | 1.25 | 1.31 | 1.13 | 2.06 | 2.50 |
| 5/8 | 3 | 95 | 1.00 | .56 | 2.38 | 1.25 | 1.31 | 1.25 | 2.06 | 2.50 |
| 3/4 | 4 | 130 | 1.50 | .63 | 2.75 | 1.38 | 1.50 | 1.38 | 2.31 | 2.75 |
| 7/8 | 4 | 225 | 2.7 | .75 | 3.19 | 1.44 | 1.81 | 1.69 | 2.63 | 3.31 |
| 1 | 5 | 225 | 2.7 | .75 | 3.63 | 1.75 | 1.88 | 1.75 | 2.63 | 3.47 |
| 1 1/8 | 6 | 225 | 3.1 | .75 | 4.00 | 2.00 | 2.00 | 1.88 | 2.81 | 3.56 |
| 1 1/4 | 7 | 360 | 4.6 | .88 | 4.38 | 2.25 | 2.31 | 2.06 | 3.25 | 4.06 |
| 1 3/8 | 7 | 360 | 5.2 | .88 | 4.63 | 2.31 | 2.38 | 2.25 | 3.44 | 4.25 |
| 1 1/2 | 8 | 360 | 5.9 | .88 | 4.94 | 2.38 | 2.63 | 2.50 | 3.50 | 4.38 |
| 1 3/4 | 8 | 590 | 9.8 | 1.13 | 5.88 | 2.75 | 3.06 | 2.88 | 3.75 | 5.25 |
| 2 | 8 | 750 | 13.75 | 1.25 | 6.50 | 3.00 | 3.31 | 3.38 | 4.44 | 5.81 |
| 2 1/4 | 8 | 750 | 15.7 | 1.25 | 7.13 | 3.31 | 3.88 | 3.81 | 4.50 | 6.31 |
| 2 1/2 | 9 | 750 | 17.9 | 1.25 | 7.75 | 3.38 | 4.13 | 4.25 | 4.50 | 6.44 |
Blue U-Bolts (Korea)
When using U-bolt clamps, extreme care must be exercised to make certain that they are attached correctly. The correct way to attach U-bolts is shown above; the "U" section is in contact with the ropes\’s "dead end" and is clear of the thimble. The "live end", carrying the load, is gripped by the saddle of the clamp. Also, the tightening and retightening of the nuts must be accomplished as required.
* Based on clean, unlubricated threads.
Hot galvanized, according to Federal Specification FF-C-450D, Type 1, Class 1. Does not include 1/8" and 3/16".
Table above shows minimum torque required to reach maximum holding power.
Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope.
WARNING: Read important warnings and safety information.
Malleable Wire Rope Clamps
|
MALLEABLE WIRE ROPE CLAMPS- Self Colored. |
|||
| SIZE | MINIMUM NUMBER OF CLAMPS REQUIRED | APPROX. WEIGHT EACH IN POUNDS | |
| 5/8 | 5 | .53 | |
| 34 | 6 | .84 | |
CAUTION: THIS MATERIAL DESIGNED FOR DECKLASHING PURPOSES ONLY. NEVER EXCEED THE WORKING LOAD LIMIT.
WARNING: Read important warnings and safety information.
Stainless Wire Rope Clamps
|
STAINLESS WIRE ROPE CLAMPS- TYPE 304 – Precision cast – |
||||||||||
| SIZE IN INCHES | MIN. CLAMPS REQD. | TORQUE IN LBS. FT.* | APPROX. WEIGHT IN POUNDS | |||||||
| 1/16 | 2 | |||||||||
| 1/8 | 2 | 7.5 | .06 | |||||||
| 3/16 | 2 | 7.5 | .19 | |||||||
| 1/4 | 2 | 15 | .19 | |||||||
| 5/16 | 2 | 30 | .30 | |||||||
| 3/8 | 2 | 45 | .46 | |||||||
| 1/2 | 3 | 65 | .65 | |||||||
| 5/8 | 3 | 95 | 1.0 | |||||||
| 3/4 | 4 | 130 | 1.5 | |||||||
| STAINLESS WIRE ROPE CLAMPS- TPYE 316- Precision Cast Drop Forged Style |
||||||||||
| SIZE IN INCHES | MIN. CLAMPS REQD. | TORQUE IN LBS. FT.* | APPROX. WEIGHT IN POUNDS | |||||||
| 1/16 | 2 | .01 | ||||||||
| 1/8 | 2 | 4.5 | .02 | |||||||
| 3/16 | 2 | 7.5 | .05 | |||||||
| 1/4 | 2 | 15 | .08 | |||||||
| 5/16 | 2 | 30 | .14 | |||||||
| 3/8 | 2 | 45 | .21 | |||||||
| 1/2 | 3 | 65 | .35 | |||||||
| 5/8 | 3 | 95 | .48 | |||||||
| 3/4 | 4 | 130 | .70 | |||||||
| 1 | 4 | 1.16 | ||||||||
CAUTION: Never use any wire rope clamp to directly connect two straight lengths of wire rope.
WARNING: Read important warnings and safety information.
Drop Forged Fist Grip Clamps
  |
| Drop Forged Fist Grip Clamps |
| US TYPE DROP FORGED FIST GRIP CLAMPS | ||||||||||
| SIZE IN INCHES | DIMENSIONS | APPROX. WEIGHT IN POUNDS | ||||||||
| A | B | C | D | E | G | L | M | N | ||
| 3/16 – 1/4 | .25 | 1.25 | .34 | .94 | .38 | 1.28 | 1.63 | .69 | 1.47 | 23 |
| 5/16 | .31 | 1.34 | .44 | 1.06 | .38 | 1.47 | 1.94 | .69 | 1.56 | 28 |
| 3/8 | .38 | 1.59 | .50 | 1.06 | .44 | 1.81 | 2.38 | .75 | 1.88 | 40 |
| 7/16 – 1/2 | .50 | 1.88 | .56 | 1.25 | .50 | 2.19 | 2.75 | .88 | 2.19 | 62 |
| 9/16 – 5/8 | .63 | 2.28 | .69 | 1.50 | .63 | 2.69 | 3.50 | 1.06 | 2.63 | 103 |
| 3/4 | .75 | 2.69 | .88 | 1.81 | .75 | 2.94 | 3.75 | 1.25 | 3.06 | 175 |
| 7/8 | .88 | 2.97 | .97 | 2.13 | .75 | 3.31 | 4.13 | 1.25 | 3.14 | 225 |
| 1 | 1.00 | 3.06 | 1.19 | 2.25 | .75 | 3.72 | 4.63 | 1.25 | 3.53 | 300 |
| 1 1/8 | 1.13 | 3.44 | 1.28 | 2.38 | .88 | 4.19 | 5.25 | 1.44 | 3.91 | 400 |
| 1 1/4 | 1.25 | 3.56 | 1.34 | 2.50 | .88 | 4.25 | 5.25 | 1.44 | 4.03 | 400 |
| 1 3/8 – 1 1/2 | 1.50 | 4.13 | 1.56 | 3.00 | 1.00 | 5.56 | 7.00 | 1.63 | 4.66 | 700 |
Bolts are an integral part of the saddle. Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation.
- According to Federal Specification FF-C-450, Type III, Class I.
- All sizes have forged steel saddles.
- Entire clamp is Galvanized to resist corrosive and rusting action.
- All clamps are individually bagged or tagged with proper application instructions and warning information.
- Assembled with standard heavy hex nuts.
WARNING: Read important warnings and safety information.
Drop Forged Wire Rope Clamps
|
| Drop Forged Wire Rope Clamps |
| DROP FORGED WIRE ROPE CLAMPS – Forged steel, hot galvanized | ||||||||||
| SIZE IN INCHES |
MIN. CLAMPS REQD. | TORQUE IN LBS. FT.* | APPROX. WEIGHT IN POUNDS | DIMENSIONS | ||||||
| A | B | C | D | E | F | G | ||||
| 1/8 | 2 | 4.5 | .05 | .19 | .75 | .44 | .44 | .38 | .81 | .94 |
| 3/16 | 2 | 7.5 | .10 | .25 | .94 | .56 | .56 | .50 | .94 | 1.19 |
| 1/4 | 2 | 15 | .18 | .31 | 1.06 | .56 | .75 | .63 | 1.19 | 1.50 |
| 5/16 | 2 | 30 | .31 | .38 | 1.44 | .75 | .88 | .75 | 1.31 | 1.69 |
| 3/8 | 2 | 45 | .46 | .44 | 1.50 | .75 | 1.00 | .88 | 1.56 | 1.94 |
| 7/16 | 3 | 65 | .73 | .50 | 1.88 | 1.00 | 1.19 | 1.00 | 1.81 | 2.31 |
| 1/2 | 3 | 65 | .73 | .50 | 1.88 | 1.00 | 1.19 | 1.06 | 1.81 | 2.31 |
| 9/16 | 3 | 95 | 1.00 | .56 | 2.38 | 1.25 | 1.31 | 1.13 | 2.06 | 2.50 |
| 5/8 | 3 | 95 | 1.00 | .56 | 2.38 | 1.25 | 1.31 | 1.25 | 2.06 | 2.50 |
| 3/4 | 4 | 130 | 1.50 | .63 | 2.75 | 1.38 | 1.50 | 1.38 | 2.31 | 2.75 |
| 7/8 | 4 | 225 | 2.7 | .75 | 3.19 | 1.44 | 1.81 | 1.69 | 2.63 | 3.31 |
| 1 | 5 | 225 | 2.7 | .75 | 3.63 | 1.75 | 1.88 | 1.75 | 2.63 | 3.47 |
| 1 1/8 | 6 | 225 | 3.1 | .75 | 4.00 | 2.00 | 2.00 | 1.88 | 2.81 | 3.56 |
| 1 1/4 | 7 | 360 | 4.6 | .88 | 4.38 | 2.25 | 2.31 | 2.06 | 3.25 | 4.06 |
| 1 3/8 | 7 | 360 | 5.2 | .88 | 4.63 | 2.31 | 2.38 | 2.25 | 3.44 | 4.25 |
| 1 1/2 | 8 | 360 | 5.9 | .88 | 4.94 | 2.38 | 2.63 | 2.50 | 3.50 | 4.38 |
| 1 3/4 | 8 | 590 | 9.8 | 1.13 | 5.88 | 2.75 | 3.06 | 2.88 | 3.75 | 5.25 |
| 2 | 8 | 750 | 13.75 | 1.25 | 6.50 | 3.00 | 3.31 | 3.38 | 4.44 | 5.81 |
| 2 1/4 | 8 | 750 | 15.7 | 1.25 | 7.13 | 3.31 | 3.88 | 3.81 | 4.50 | 6.31 |
| 2 1/2 | 9 | 750 | 17.9 | 1.25 | 7.75 | 3.38 | 4.13 | 4.25 | 4.50 | 6.44 |
When using U-bolt clamps, extreme care must be exercised to make certain that they are attached correctly. The correct way to attach U-bolts is shown above; the "U" section is in contact with the ropes\’s "dead end" and is clear of the thimble. The "live end", carrying the load, is gripped by the saddle of the clamp. Also, the tightening and retightening of the nuts must be accomplished as required.
* Based on clean, unlubricated threads.
Hot galvanized, according to Federal Specification FF-C-450D, Type 1, Class 1. Does not include 1/8" and 3/16".
Table above shows minimum torque required to reach maximum holding power.
Caution: Never use any wire rope clamp to directly connect two straight lengths of wire rope.
WARNING: Read important warnings and safety information.
Elite Sales Combine Forces With High Performance Wire Ropes Of America For American Made High Performance Wire Rope
High Performance Wire Ropes of America (HPRA) and Elite Sales, Inc. (ESI) have entered into an exclusive sales and marketing agreement whereby Elite Sales will be the Exclusive Wholesaler for HPRA products for the following geographic locations: United States, Canada, Mexico, Latin America and the Caribbean. Elite Sales offers its brand of products to help its customers successfully compete in their respective markets. High Performance Wire Ropes of America is a newly organized company with a long history in the wire rope industry; the new state-of-the-art facility is located in Belton, Texas. As a company ESI takes pride in our goal to supply only as a wholesale wire rope distributor. This is why we have partnered with HPRA as the exclusive sales representative to bring you the highest quality wire rope, wire rope products and hardware. ESI is the US foremost importers and wholesale distributors of Wire Rope, Cable, Strand, Chain and Hardware. We attribute our growth and success to our loyal partners, our customers all over the World. Elite Sales, Inc. is a distributor and wholesaler of the following products: Wire Rope, Wire Rope hardware, Hooks, Swivels, Shackles, Fittings, Stainless and Galvanized Cable, Blocks, Tie-Downs, Flat Hooks, Chains, Triangles, Thimbles, Snap Hooks, Connecting Links, Turn-buckles, Clips, Eye Bolts, Links, and rotating resistant and general purpose wire rope. We are focused on our clients and in providing top quality products with superior service. Our goal is to give every customer the Elite Purchase Advantage which insures the very best product at the very best price.
View this Hardware Article Now
Call (866) 520-8533 to Speak with ESI
- Turnbuckle Dimensions (509)
You are currently browsing the Transport Wire Rope and Transport Chain Supply™ blog archives for June, 2011.
